How should steel pipe fasteners be used correctly?
Steel pipe fastener manufacturer: How should steel pipe fasteners be used correctly?
The steel pipe fastener products introduced by the editor of the steel pipe fastener manufacturer are well understood by everyone. Do you know how to improve the use of steel pipe fasteners and ensure their service life? As a professional manufacturer of steel pipe fasteners, China will introduce and analyze how to use steel pipe fasteners reasonably to obtain effective time to extend the service life of steel pipe fasteners.
When using steel pipe fasteners, it is necessary to have a detailed construction plan, so that customized steel pipe fasteners can be constructed more strictly and thoroughly. If the plan is not good, unpredictable events may occur during the construction process.
The appearance quality of steel pipe fasteners should be inspected, and they should not be used if there are cracks, deformations, or bolt slippage. Avoid using these construction aids.
Steel pipe fastener products must be sampled and inspected before use to check the quality of the steel pipe and fastener. The sampling quantity should be carried out according to corresponding rules, and the sampling inspection should also be carried out in a certain proportion. Products that have not passed the inspection cannot be used.
For the bearing capacity of steel pipe fasteners, during the construction process, they must not be overloaded and bear a certain amount of weight. Scaffolds cannot be connected to template brackets, and certain measures must be taken during connection to ensure the reasonable bearing capacity of the fasteners.
Three precautions for building steel pipe fasteners:
Equipment fasteners are one of the common items on construction sites, but due to the large number of unfavorable items, special workers will damage and neatly place the equipment fasteners, waiting for the rental station to pull them away. There are also many ways in this process. Next, let's talk about these three areas:
One is to set up an unloading bridge yard at the entrance of each floor, with two protective railings and a dense mesh set up on both sides of the bridge yard. If there is a malfunction in the lower opening of the bridge yard, an octagonal shape should be set up, and the cleared materials must be cleaned in real time and transported to the designated location for stacking.
The second is that the wheeled frame must be equipped with a double crown block, top pile steel pipe or eight shaped pole, and fastened with fasteners. When disassembling to the bottom, it should be temporarily fixed before disassembly. When dismantling scaffolding poles, 2-3 people must drive together. When dismantling the longitudinal pole, the person standing in the center should be informed downwards and throwing downwards is strictly prohibited.
The third is to assemble the triangular pillar gantry, with flanges welded at both ends of each column. When assembling the triangular pillar gantry, it is necessary to check whether the welding joints of each component are secure, and the bolts of each node must be tightened. The triangular pillar at the base of the mouth should be adjacent to the ground beam, and the bottom of the ground beam should be anchored and buried underground to prevent sliding. When the ground beam is buried, the foundation should be flat and compacted. During the demolition process, a responsible and skilled worker should be assigned to command and supervise, striving to do a good job in material demolition and supervision.