From its name, we can tell what this product is used for. After continuous improvement, this product has more and more functions. In order to make more people familiar with it, the editor will introduce some basic information about galvanized steel springboard for everyone? If you want to know, let's take a look together. I hope it can help you.
The galvanized steel springboard is made of Q235B steel plate with a thickness of 1.5mm by cold processing, and its material and production should comply with the national standard GB15831-2006 steel pipe scaffold fasteners. The overall dimensions of the galvanized steel springboard are 2000-4000mm in length, 240mm in width, and 65mm in height. The galvanized steel springboard is made of I-beam structure on both sides (with high strength), and the surface protrudes and turns (anti slip and anti accumulation). Sand), press double rows of steel bars on both sides of the surface near the I-beam (at the edge of the I-beam). The double rows of steel bars form two inverted triangular grooves on the surface of the scaffolding steel springboard on the I-beam, and are embedded under the main board. The number of reinforcing bars for galvanized steel springboards is: 4 meters of steel springboards should have 5 reinforcing bars.
The length error of galvanized steel springboard shall not exceed 3.0mm, the width shall not exceed 2.0mm, and the height error of hole flanging shall not exceed 0.5mm. Anti slip hole diameter (12mm x 18mm), hole spacing (30mm x 40mm), flange height 1.5mm. The bending angle of hot-dip galvanized steel springboard should be maintained at 90 °, and the deviation should not exceed 2 °. The surface of galvanized steel springboard should be flat, and the deflection of the board surface should not exceed 3.0 millimeters. During welding, the base material should not be damaged due to welding to ensure the quality of galvanizing, control deformation, and prohibit false welding and disassembly welding. The edge folding of the end plate and the discontinuous rib plate should be reinforced by spot welding, and the weld seam should be kept flat. The gap x should be less than 1.5mm (based on the provided template, it should not exceed).
We know that galvanized steel springboards are a construction tool in the construction industry. Generally referred to as steel scaffolding, construction steel springboard, steel pedal, galvanized steel springboard, hot-dip galvanized steel pedal, widely used in shipbuilding, oil platforms, power, and construction industries. There are M18 bolt holes on the steel springboard for plate to plate connection and adjusting the width of the platform bottom. Use a skirting board with a height of 180 millimeters between the steel springboard and the steel springboard. The baseboards are coated with black and yellow paint, and they are fixed with screws in their respective 3 holes. In this way, the steel springboard and steel springboard can be fixed and connected. After the connection of the galvanized steel springboard is completed, the platform materials are strictly inspected and tested after the platform is completed. After installation is completed, it can only be put into use after approval for listing.
The above article is about the basic information of the galvanized steel springboard manufacturer's products for you. I wonder if you have understood it. If you still don't understand, come and read it quickly. Alright, that's all for today's knowledge points. I hope they can be helpful to you.