-
About usRelying on the strong capital strength of the parent company and more than ten years of industry experience and influence.
-
ProductOur company currently has 3 fully automatic casting fastener molding production lines; 2 production lines for forged and stamped fasteners; There are 8 fully automatic hot-dip galvanized steel springboard production lines and
-
NewsMarket dynamics, industry information, and quick sharing with you
-
Production LineOur company currently has 3 fully automatic casting fastener molding production lines; 2 production lines for forged and stamped fasteners; There are 8 fully automatic hot-dip galvanized steel springboard production lines. Le
热镀锌钢跳板的特征
Release time：
2020-08-19 15:33
source：
随着我国造船业、建筑工程业、核电站、水电站等不断发展，从而增大了热镀锌钢跳板在市场上的需求量。热镀锌钢跳板大家可能会在建筑施工中经常看见，然而在板面会钻有M18螺栓孔，这个孔是用来干嘛的呢？其实很简单，钻孔设计主要是用于板面排水问题。因为一般来说这些钢跳板经常是裸露在室外的，而根据天气影响，遇到雨雪天气，就会覆盖在板面上，容易使人滑倒。有了孔，就可以解决这个问题了，更提高了安全性。此外热镀锌钢跳板还有以下其他特征：
1.热镀锌钢跳板的外形尺寸长度为2000mm-3000mm-4000mm，宽度为240mm / 245mm/250mm高度为65mm/45mm/50mm
2.热镀锌钢跳板外形尺寸长度误差不宜超过+3.0mm，宽度不宜超过+2.0mm，孔翻边高度误差不宜超过+0.5mm。防滑孔孔径(12mmx18mm)，孔距(30mmx40mm)，翻边高度1.5mm。
3.热镀锌钢跳板的折边弯角宜保持90°，揭东钢跳板，偏差不宜超过+2°。
4.热镀锌钢跳板的板面应平整，板面挠曲度不超过3.0mm。
5.热镀锌钢跳板的板边等毛刺必须挫平。
6.端头板折边和间断筋板采用加强点焊，防滑镀锌钢跳板，焊缝应保持平整。
Previous
Next
Previous
Next
Correlation News
2023-01-03
Contact Us
business license